RAMSET D60 Betriebsanleitung PDF herunterladen (Seite 5)

Tool Handling Safety

1. Always be sure tool is operating

properly before attempting to use

it. Follow the “Daily Function Check”

shown to the right and described

on page 9.

2. Always load tool using a disc load

selected directly from a box indicating

the power load type and number.

Never attempt to use loose disc

loads that could be mis-identified.

3.

Never carry loose disc loads in pockets

with pins or other hard objects.

4. Never load a tool unless you intend

to immediately make a fastening.

Loading a tool and leaving it unattended

in the work area can result in the tool

being accidentally discharged by others.

5. Never place your hand or any other

body part over the fastener loading

end of the tool. Serious hand injury

could result from being struck by either

a fastener or the tool piston should the

tool be accidentally fired.

6. Always store the tool unloaded and

keep the tool and the loads securely

locked in a tool box. Keep keys away

f

rom children and unlicensed persons.

7. Always keep the tool pointed away

from yourself and others.

8. Never carry a loaded tool around

the work area.

9. Never allow anyone not trained

to use the tool.

10. Never engage in horseplay with

the tool.

11. Using the tool in poorly ventilated

areas, cleaning tool or handling

loads may result in exposure to

lead or other substances known

to cause birth defects, and other

physical harm. Have adequate

ventilation at all times and wash

thoroughly after exposure.

DANGER

SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS

DANGER 5

NEVER LOAD THE TOOL UNLESS IT IS

TO BE USED IMMEDIATELY

NEVER PLACE HANDS OR BODY OVER

MUZZLE OPENING

KEEP TOOL LOCKED & OUT OF THE

REACH OF CHILDREN

ALWAYS DO A DAILY FUNCTION CHECK

BEFORE LOADING TOOL

A

B

C

D

Empty

1

2

1 2 3 4 5 6 7 8 9 10 ... 17 18

Kommentare zu diesen Handbüchern

Keine Kommentare