RAMSET GYPFAST Betriebsanleitung PDF herunterladen (Seite 5)

TOOL LOADING

LOADING AND UNLOADING NAILS

1. Lay the tool on its right side, exposing the

gate latch.

2. Unlatch and open the gate. Swing open the

magazine cover.

3. Uncoil 3” of nails.

4. Guide the first nail into the drive raceway while

placing the coil of nails into the magazine.

5. Close the magazine and gate and you are now

ready to start driving nails.

To unload nails from a tool, first tear off excess

collation sticking out the front of the tool. Unlatch

and open the gate to remove the rest of the coil.

TOOL OPERATION

OPERATION OF TOOL

This tool is equipped with a safety yoke, which

must be pushed to the work surface for the tool

to operate when the trigger is actuated. Two

methods of tool actuation are:

1.SingleShotOperation.This method of operat-

ing the tool is used when precise fastener loca-

tion is more important than speed of operation.

Press the safety yoke against the work surface,

then pull the trigger to drive the fastener.

BumpFireorContactOperation. This method

of operating the tool is used when speed of

operation is more important than precise fastener

location. Pull and hold the trigger, then strike the

safety yoke against the work surface where the

fastener is to be driven. Repeat this action as

rapidly as required.

TO PREVENT UNINTENTIONAL TOOL OPERATION

AND POSSIBLE INJURY TO YOURSELF OR

ANYONE IN THE WORKING AREA, BE SURE TO

RELEASE THE TRIGGER AS SOON AS YOU HAVE

FINISHED DRIVING FASTENERS.

NEVER PRESS THE SAFETY YOKE AGAINST

ANY OBJECT EXCEPT THE MATERIAL TO BE

FASTENED.

As the nails are being driven, the leftover collation

is fed through the nose of the tool. As collation

accumulates, it can be torn off by twisting and

pulling down on the collation. Keep your finger

off the trigger when performing this procedure.

TOOL LOADING / TOOL OPERATION

1 2 3 4 5 6 7 8

Kommentare zu diesen Handbüchern

Keine Kommentare

RAMSET GYPFAST Betriebsanleitung Seite 5

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Elektrowerkzeuge RAMSET GYPFAST