RAMSET RT400 M Betriebsanleitung PDF herunterladen (Seite 11)

REFER TO PARTS SCHEMATIC FOR PROPER ASSEMBLY OF PARTS

– Overdriving of fasteners – Excessive power – Change to the next lower

power level load strip

color and number. Reduce

power by turning the

power adjustment wheel.

– Soft base material – Check base material

(see page 3)

– Tool fails to fire – Failure to depress – See “Tool does not

completely completely depress”

– Excessive dirt buildup on – After following misfire

breech face not allowing procedure, check firing

proper penetration of pin indentation on load.

firing pin Clean breech face

– Firing pin and/or breech – Replace damaged parts

damaged

– Tool does not completely – Misassembled or – Check all parts in the

depress damaged parts receiver for damage or

improper assembly.

– Reduction or loss of power – Piston not being returned – Check to be sure that the

to the full rear position return spring has pulled

the barrel completely open

to properly position the

piston.

– Worn or damaged retention – Replace missing worn or

balls or clip on the buffer damaged parts

assembly

– Worn or broken pawls – Replace pawls

– Tool cannot be cocked – Excessive dirt buildup – Clean tool thoroughly

or opened

– Damaged or bent piston – Replace piston

– Broken or damaged parts – Tag tool with warning

“Defective–Do Not Use”

Place in a locked container

and contact your local

ITW Ramset/Red Head

representative for service.

– Failure to index strip – Strip not inserted in tool – Check load strip. Properly

correctly or is damaged dispose of damaged strip.

(See page 6)

– Damaged indexing – Contact your ITW Ramset/

mechanism Red Head Distributor for

assistance

TROUBLESHOOTING

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18

Kommentare zu diesen Handbüchern

Keine Kommentare

RAMSET RT400 M Betriebsanleitung Seite 11

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Elektrowerkzeuge RAMSET RT400 M