RAMSET RAM 1000 Betriebsanleitung PDF herunterladen (Seite 16)

TROUBLESHOOTING

SYMPTOM POSSIBLE PROBLEMS SERVICE

Returning/Purging Stage of Operation

If the TrakFast tool will not operate after following the above service directions,

return the tool to an Ramset Distributor Sales Representative for service.

800-241-5640

www.ramset.com

— Tool operated and

drove fastener, but

piston did not return

to up position.

— Combustion Chamber

does not drop after tool

cycles.

— Built-up dirt and debris

on Piston or in Nose

bore.

— Mushrooming of

Piston Tip.

— Exhaust ports on the

Sleeve are dirty or

clogged.

— Tool (Sleeve) or

O-Rings are dirty.

— Work Contacting

Element is bent,

or tool is dirty.

— Clean Piston and Nose bore with safety

solvent.

— Contact Ramset Distributor Sales

Representative for service.

— Return tool to Authorized Ramset Distributor

Sales Representative for service.

— Clean tool per Cleaning Procedure.

— Clean tool or replace Work Contacting

Element as required.

1 2 ... 11 12 13 14 15 16 17 18

Keine Kommentare

RAMSET RAM 1000 Betriebsanleitung Seite 16