RAMSET RAM 1000 Betriebsanleitung PDF herunterladen (Seite 4)

SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS

4

The following safety instructions have been

included in this manual to provide you with

basic information necessary for safe operation

of the TrakFast Tool. DO NOT ATTEMPT TO

OPERATE THIS TOOL UNTIL YOU READ AND

UNDERSTAND ALL SAFETY PRECAUTIONS

AND MANUAL INSTRUCTIONS.

Failure to follow all safety precautions and

manual instructions can result in blindness,

severe personal injury, damage to personal

property, and damage to the tool.

In addition to these instructions, additional

training may be necessary, depending

upon the type of fastening you wish to

do. Contact your Ramset Distributor

Representative for additional information.

DANGER

Do not attempt to operate

this tool until you have read

and understood all safety

precautions and manual

instructions.

Failure to follow all safety precautions and

instructions may result in a permanent loss

of vision, serious personal or even fatal injury,

property damage and/or tool damage.

The TrakFast Tool is an

internal combustion device.

It produces hot exhaust

gases that may ignite

flammable materials. This tool must not be

used in a combustible environment or in the

presence of combustible materials, such as

flammable chemicals, adhesives, gasoline,

or solvents.

Do not expose the tool to

temperatures in excess of

120°F (49°C). Fuel and/or

the battery may burst,

releasing flammable gas.

This tool must be operated

only in a well-ventilated

environment,

because the

tool exhausts carbon

monoxide similar to a

gas chainsaw or lawnmower. Exposure

to carbon monoxide may cause dizziness,

nausea, or unconsciousness.

ALWAYS keep the TrakFast

Tool, fuel cell, battery cell

and battery charger out

of the reach of children.

1. READ THIS MANUAL FROM COVER

TO COVER. Always turn to this manual

for information about the safe operation

and servicing of the TrakFast tool. If any

portion seems unclear, or you have any

questions, contact your Ramset Distributor

Representative immediately.

2. WEAR EYE AND

HEARING PROTECTION.

Always wear hearing and

eye protection devices

when you are operating

the TrakFast tool or

working in the vicinity of this tool. Also, your

eye protection must meet the

requirement

of ANSI Standard Z87, and should

have side

shields for increased protection.

3. NEVER ASSUME THE TOOL IS EMPTY.

Every time you pick up the TrakFast tool,

check the Magazine for fasteners. Never

point the tool at anyone or yourself, even

if you are absolutely sure there are no

fasteners in the tool. The fastener you did

not see is the fastener that can injure you

or someone else.

4. NEVER ENGAGE IN “HORSEPLAY”

WITH THE TOOL. The TrakFast tool is not

a toy. . . it is a power fastening tool. It is

designed to drive a fastener through steel

sheets into concrete. To accomplish this

task, it generates a tremendous amount

of energy. Fooling around, even when you

are absolutely sure there are no fasteners

in the tool, is asking for an accident.

1 2 3 4 5 6 7 8 9 ... 17 18

Kommentare zu diesen Handbüchern

Keine Kommentare

Kliknij na poniższy alfabet, aby przejść do pełnej listy modeli zaczynających się od tej litery

All
p

Modele	Rodzaj dokumentu
PageMaster 1600c	Arkusz Danych Compuprint PRKN707-1 printer ribbon, 1 strony