RAMSET SA270 Betriebsanleitung PDF herunterladen (Seite 13)

PARTS LIST / MAINTENANCE

Always make sure the tool is not loaded before performing any service or repair and

always wear safety goggles when cleaning or servicing the tool.

NORMAL CLEANING

All front end parts shown in the disassembly section are to be cleaned daily with a good

detergent oil and wire brush. Remove all dirt and carbon buildup and wipe parts dry with

a clean rag. Check all parts for wear or damage before reassembly and replace or repair

any worn or damaged parts.

COMPLETE CLEANING / GENERAL MAINTENANCE

Heavy or constant exposure to dirt and debris may require that the tool be cleaned more

extensively. Complete disassembly and cleaning of all parts may be necessary to restore

the tool to normal operation. General maintenance should be performed every six months

or more often if the tool is subjected to heavy use. Contact your authorized Ramset

Distributor for assistance.

IMPROPERLY MAINTAINED TOOLS CAN CAUSE SERIOUS INJURIES

TO TOOL OPERATOR AND BYSTANDERS

CLEAN TOOL DAILY

ALWAYS FUNCTION TEST THE TOOL AFTER PERFORMING ANY

SERVICE. SEE PAGE 9 FOR DETAILS ON THE FUNCTION TEST.

MAINTENANCE

SA270 (G-SERIES) PARTS LIST

KEY PART NO. DESCRIPTION

1 28266 REAR BARREL ASSEMBLY

2 27563A LOAD ADVANCE ROD ASSEMBLY

3 27833 PISTON WITH RING

5 27834 BUFFER

6 27831 MUZZLE BUSHING ASSEMBLY

7 28310 ROTARY SEAR & COCKING ROD KIT

8 27524A STRIP DETENT BALL AND SPRING

9 27580 SPALL GUARD

10 27888 FRONT HOUSING KIT

11 28090 MECHANISM HOUSING

12 28157 FIRING PIN KIT

13 28178 POWER ADJUSTMENT KIT

14 27527A ADVANCE LEVER KIT

15 28135 END CAP KIT

16 27608 TRIGGER KIT

17 28170 RUBBER HANDLE

18 27923 RETRACTOR KIT

19 27664 FRONT BARREL

20 28277 OUTER HOUSING

22 27882 FRONT BARREL RETAINER KIT

23 27516A TRIGGER PIN & SPRING

25 A1095 MECHANISM HOUSING PLUG

* The receiver weldment is not available as a spare part

1 2 ... 8 9 10 11 12 13 14 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare

RAMSET SA270 Betriebsanleitung Seite 13

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Elektrowerkzeuge RAMSET SA270