RAMSET XT540 Betriebsanleitung PDF herunterladen (Seite 10)

2. Insert the power load.

With the tool in the closed position

insert a power load strip into the

cavity in the base of the rubber handle

and push in until the flat of your finger

tip is firmly against the handle recess.

The first power load is now aligned

with the chamber.

Note: Always use the lowest strength

power load and lowest power setting

first, for a firing test, then adjust the

power to suit the job.

3. Fire the tool.

Press the fastener guide firmly against

the work surface, and pull the trigger.

4. Check the fastener has been

correctly set. (See Fastening

Applications, page 8)

5. Adjust the power, if necessary.

Increase power by increasing

power setting. When maximum

setting is reached, move wheel back

to minimum position and insert next

strength power load.

TOOL OPERATING INSTRUCTIONS

TOOL OPERATING INSTRUCTIONS

10

2. INSERT THE POWER LOAD

5. ADJUST THE POWER, IF NECESSARY

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare